Friday, April 11, 2008

156- mTech DRO 3M on Capstan Lathe -- Trevor (UK)

Thanks Trevor from UK for sharing with us his mTech DRO3M on his Capstan Lathe.

His Installation is unique, as he is installing 3 axis to his lathe machine. As such, he needs to use a DRO3M console to display all the 3 axis together. By adjusting the parameter setting on the X axis resolution, it is possible to make the X axis display as Radius or Diameter counting.

Email before his installation:
"Mine will be an interesting/unusual installation as I am installing the 3 axis version on a large Capstan lathe.
This probably isn't ideal as many of the milling type functions will have no purpose on the lathe,however I need the third axis for tailstock/capstan boring so the 3 axis DRO I selected is probably my best choice.

I did consider fitting a 2 axis one and using a serial switch to switch between the third and another axis but thought that might cause problems.

I believe from the manual it is possible to alter the counting resolution for the axis I will install on my cross slide in "system settings" so that it reads radius rather than diameter? If so this will be very convenient,if not It's no big problem.

regards for now will be in touch again soon.
Trevor"

Here is his photo of the whole installation process:
1 X axis during install

2 Y axis during installation


3 Z axis during install


4 overlapping x & Z covers installed


5 overlapping axis end view


6 Y axis cover installed


7 cables clipped


8 cables tidied



9 covers and cables


10 view of readout


Email after his installation:
"
As promised I am now sending you some pictures of my finished installation.Everything works fine and I am very pleased with how it all worked out.

My X and Z axis share the same measured space so I have installed one overlapping the other. It would be poor practice normally to install an axis so far away from the slide as this would introduce accurracy issues. However my machine is extremely robust and tight so in practice I have no problems on that front.

A long axis with 2 read heads would have saved the need to do the overlap if one were available.I have sheltered my X and Y axis under heavy metal sections as well as fitting the supplied covers to give them maximum physical protection in the event of a workpiece coming loose fro m the chuck or some of the larger tooling from this machine being accidentally dropped. I am very impressed with the features of the display unit.I think I have achieved an unusual and imaginative use of the 3 axis mill unit on a lathe."

For information, if you need a long scale with 2 reader head, it is available on request. But most likely, it will cost more than having 2 scales separately.

Thanks for the great photo, cheers.

154- mTech DRO on Bridgeport milling machine and Nardini Lathe -- Jim (USA)

Thanks Jim from USA (AZ) for sharing with us his mTech DRO2M and DRO2L installation on his Bridgeport milling machine and Nardini Lathe.

He has bought a DRO2M 2axis Milling DRO in November. After mTECH DRO has proven to be reliable and useful, he proceed to buy another set for his lathe in December, all within a period of 1 month.

Jim wrote :"

DRO Trader
The lathe and mill DRO were promply shipped and were a great value for the price . The attached pictures show my finished installation on a 12 " nardini and a bridgeport mill . The lathe cross slide was very difficult to fit in the limited space . There were several extra drilled and tapped holes before a final working position was found .
Thanks Jim"



Lathe
Nardini - X axis:


Lathe Nardini Z axis:


Lathe Nardini -X and Z axis:


----------------------

Bridgeport Milling : Y axis


Bridgeport Milling Overall view:


Thanks Jim again for your time and effort to take those photos.

184- mTech DRO-2L on Longem Lathe -- Pat (Canada)

Thanks Pat from Canada for sharing photos of his Longem Lathe with 12" swing and 42" bed.


"Here are the pictures of the DRO-2M
on my Longem 12 " swing 42" bed lathe. I
haven`t done the final cable routing, this was
just done for inital testing which went perfect.
thanks for everything Pat"


X axis installation



Z axis installation


Thanks once again.

Friday, January 25, 2008

131- mTech DRO-2M on RF31 milling machine -- Al Betzwieser (USA)

Thanks Al for sharing with us his mTech DRO2M installation on his RF31 milling machine.

Al has taken great care to install the X axis : " I mounted the X scale on the front of the table because I didn’t want to lose any Y travel. I also had to mount the X scale guard a little different because it would interfere with the X axis table locks. "

Overview of his RF31 Milling machine


Y axis installation (side view)



Y axis installation (front view)


Y axis installation (side view)


X axis installation (without cover)


X axis close-up with the cover installed


X axis installation with the cover installed.




Thanks Al again for your time and effort to take those photos.

Cheers

Thursday, January 24, 2008

166- mTech DRO-2M on Clausing Kondia milling machine - Charles S. (USA)

Thanks Charles for sharing with us his mTech DRO2M installation on his Clausing Kondia milling machine.

Here is what Charles had commented (no editing was done) :
"Just a quick note of thanks for an awesome DRO package. I couldn't believe it arrived in only 6 days from Singapore. I looked at a number of DRO's on Ebay before deciding on your 2M Mill package. Only yours offered the mounting and hardware package and I must say that this made all the difference in the world. Had it not been for the scale mounting brackets, generous hardware assortment, cable clamps and shims, I would have exhausted countless frustrating hours hunting up material, fabricating the mountings and searching for the right metric hardware. In addition, the free E-book was invaluable for mounting hints and especially noteworthy for the proper scale alignment proceedures. The trouble free, neat & tidy installation was due wholly to the the extra thought that you put into creating the complete DRO package. Just as your ad stated, there was nothing else to buy. Thank you for your extra effort & detail that you put into your DRO offering. C.S. Florida, USA"

Front view of the mTECH DRO



I used the supplied cable clamps on the readout for cable strain reliefs.



The X axis installation


The Y axis installation



X and Y axis installation



He had made full use of the cable clamp to tidy up his loose cables.


Thanks once again for contributing the photos for our fellow mTECH 'er

Cheers