Saturday, August 8, 2015

Connecting mTECH linear scale to a Dynomotion KFLOP for CNC conversion (Australia)

Details for the connection:


Information from Robert:
We’ve successfully connected our mTECH JCXE linear scale to the Dynomotion.

The scales connect to JP5 (which is the RJ45 connector) on the KFlop controller board.

The scales need to be supplied 5VDC. Power them from the 5 VDC power supply which runs the KFlop board. Do not use the 5 VDC supply which powers the KStep.

The connector supports up to 4 scales (encoders 4 to 7). The wires connect in pairs.
in the example below * is for the encoder channel number.

ENC*A
ENC*B

mTECH JCXE linear scale Pins & Colour Codes Connection to KFlop

1   Not Used

2 - 0V (orange)    5VDC (also called 0VDC or common)

3 - Not Used

4   Shield (Not Connected/Not Used), The shield should remain on the cables to within a 3 cm of the connection

5 - Not Used

6 - A (Yellow)   Connect to ENC*A

7 - 5V (Red)   +5VDC

8- B (Green)   Connect to ENC*B

9 - Z -Reference (Brown)   Terminate, Not Used/ Not Required

Thanks for your help, much appreciated

Cheers
Robert “
 
 

Replies from Robert (Australia):

“Hi Scott,
thanks very much for that.
its a great help. we have it worked out and when the machine is running and we can test it absolutely works, i’ll send you the details.
it’s pretty easy.

much appreciated
Robert”

Monday, July 20, 2015

3079- Hare & Forbes HAFCO Metal Master AL-320 lathe, DRO installation - from John - Australia - DRO-2L - F5-170 - E5-520


























Thanks to John Simister from Australia for the generous photos.

This is a AL-320 lathe Lathe.


It is using :
DRO-2L with scales travel - 170mm and 520mm

From John: 
" The installation is complete and went very smoothly. I am very happy with the finished job, however, I would be pleased to hear your comments after you have seen the photos. Any advice or criticism would be appreciated and helpful. I have taken the photos showing each stage. I wired the DRO into the lathe electrical box. The lathe is a AL-320. Also, I am happy to pass on any tips on the installation to prospective customers who are fitting the DRO to the same lathe.  Regards John”

3025- Microcut Lathe - from Steve - Australia - DRO-2L - F5-170 - E5-920





Thanks to Steve Newing from Australia for the generous photos.

This is a Microcut Lathe.

It is using :
DRO-2L with scales travel - 170mm and 920mm
"Very happy with the end result.
Ended up not using the linear scale brackets provided on this installation - we made our own.

Thanks for a great product with comprehensive installation kit and your service.

Kind regards

Steve”




 
 


Sunday, March 23, 2014

2606- TDS-3i on Aciera F3 Milling machine (swiss made) - Teun from Netherland

Thanks Teun from Netherland, the machine is Aciera F3, a good machine from Swiss.

The setup for the machine includes:
TDS-3i (3 axis DRO with LCD)
<![if !supportLists]>-          <![endif]>F5-220, 220mm travel scale
<![if !supportLists]>-          <![endif]>E5-320, 320mm travel scale
<![if !supportLists]>-          <![endif]>E5-320, 320mm travel scale

Items available at www.thedrostore.com


From Teun :
“I’ve finished mounting the DRO. I think I did a reasonable job. My machine is an Aciera F3 (Swissmade from the 80’ies).
I painted everything in the same RAL color as the machine so it looks like it belongs there.”

I think it is a nice installation with a touch to make it look the same color as the machine.

Cheers


2585- TDS-3i with RS232 on ENCO Drill / Mill - FL, USA (Jim)

Thanks Jim for the photos on his ENCO Drill / Mill Machine with TDS-3i DRO from www.TheDROStore.com
eBay ID : TheDroStore

The setup for this machine is :
-TDS 3i  (3 Axis LCD DRO)
-Scale Travel length -JCXF5:120mm, 4.7inch (Physical length:262mm, 10.3inch)
-Scale Travel length -JCXE5:220mm, 8.7inch (Physical length:362mm, 14.3inch)
-Scale Travel length -JCXE5:520mm, 20.5inch (Physical length:662mm, 26.1inch)
From Jim (FL, USA):
“I was surprised to see the package arrive this afternoon.  Great service! Really fast!
I have connected the scales to the DRO and powered it up to see if everything works.  Everything seems to be working in this preliminary test.  I plan to install it on my mill later this week.”

The photos show the finish work, and they are install in a nice and professional manner.

Cheers