2606- TDS-3i on Aciera F3 Milling machine (swiss made) - Teun from Netherland

Thanks Teun from Netherland, the machine is Aciera F3, a good machine from Swiss.

The setup for the machine includes:

TDS-3i (3 axis DRO with LCD)

<![if !supportLists]>-          <![endif]>F5-220, 220mm travel scale

<![if !supportLists]>-          <![endif]>E5-320, 320mm travel scale

<![if !supportLists]>-          <![endif]>E5-320, 320mm travel scale

Items available at www.thedrostore.com

From Teun :

“I’ve finished mounting the DRO. I think I did a reasonable job. My machine is an Aciera F3 (Swissmade from the 80’ies).

I painted everything in the same RAL color as the machine so it looks like it belongs there.”

I think it is a nice installation with a touch to make it look the same color as the machine.

Cheers

2585- TDS-3i with RS232 on ENCO Drill / Mill - FL, USA (Jim)

Thanks Jim for the photos on his ENCO Drill / Mill Machine with TDS-3i DRO from www.TheDROStore.com

eBay ID : TheDroStore

The setup for this machine is :

-TDS 3i  (3 Axis LCD DRO)
-Scale Travel length -JCXF5:120mm, 4.7inch (Physical length:262mm, 10.3inch)
-Scale Travel length -JCXE5:220mm, 8.7inch (Physical length:362mm, 14.3inch)
-Scale Travel length -JCXE5:520mm, 20.5inch (Physical length:662mm, 26.1inch)

From Jim (FL, USA):

“I was surprised to see the package arrive this afternoon.  Great service! Really fast!

I have connected the scales to the DRO and powered it up to see if everything works.  Everything seems to be working in this preliminary test.  I plan to install it on my mill later this week.”

The photos show the finish work, and they are install in a nice and professional manner.

Cheers